Yealink SIP- T28P User Manual Download Page 111

Page: 111 / 137

User Guide SIP-T28P IP Phone

100

Press or , or the Switch soft key to select Key Event from the Type field.

Press or , or the Switch soft key to select Hot Desking from the Key Type
field.

Leave the Value field blank.

Press the Save soft key to accept the change or the Back soft key to cancel.

You can also configure a hot desking key via web user interface at the path
Phone->DSS Keys.

To use hot desking:

Press the hot desking key when the phone is idle.

The phone prompts the following warning:

Press the OK soft key, all currently configured accounts will be erased immediately
and their configuration data will be removed from the phone.

The login wizard will be shown as below:

Enter the Login information in each filed.

Summary of Contents for SIP- T28P










































































































































Search results

Summary of Contents for SIP- T28P

Reviews:

Related manuals for SIP- T28P

Brands by name

Popular brands

Yealink SIP- T28P, User Manual

Search results

Summary of Contents for SIP- T28P

Reviews:

Related manuals for SIP- T28P

Brands by name

Popular brands