Yealink SIP- T28P User Manual Download Page 81

Page: 81 / 137

User Guide SIP-T28P IP Phone

To activate DND in phone mode:

Press the DND soft key when the phone is idle.

The icon on the idle screen indicates that the Do Not Disturb mode is enabled.

Incoming calls will be rejected automatically and "n New Missed Call(s)" ("n"
indicates the number of the missed calls) will prompt on the LCD screen.

To activate DND in custom mode for a specific account:

Press the DND soft key when the phone is idle.

The LCD screen displays a list of the accounts on the phone.

Press or to select the desired account.

Press or soft key to select On to activate DND.

Press the Save soft key to accept the change.

The icon appears on the idle screen and the specific line icon changes to
icon .

Summary of Contents for SIP- T28P










































































































































Search results

Summary of Contents for SIP- T28P

Reviews:

Related manuals for SIP- T28P

Brands by name

Popular brands

Yealink SIP- T28P, User Manual

Search results

Summary of Contents for SIP- T28P

Reviews:

Related manuals for SIP- T28P

Brands by name

Popular brands