Yealink SIP- T28P User Manual Download Page 120

Page: 120 / 137

Advanced Phone Features

109

To read a text message:

Press Menu->Messages->Text Message->Inbox.

Select the desired message and press the View soft key.

Note

To send a text message:

Press Menu->Messages->Text Message->New Message.

Compose the new text message. You can press the abc soft key to change the input
mode.

Press the Send soft key.

(Optional.) Press or , or the Switch soft key to select the desired account
from the From field.

Enter the number you want to send the message to in the To field.

Press the Send soft key to send the message or the Back soft key to cancel.

You can also send a text message via web user interface at the path Phone->SMS.

To reply a text message:

Press Menu->Messages->Text Message->Inbox.

Select the desired message and press the Reply soft key.

Compose the new text message. You can press the abc soft key to change the input
mode.

If the phone prompts receiving new text messages, you can also press the View soft key
to read the new messages directly.

Summary of Contents for SIP- T28P










































































































































Search results

Summary of Contents for SIP- T28P

Reviews:

Related manuals for SIP- T28P

Brands by name

Popular brands

Yealink SIP- T28P, User Manual

Search results

Summary of Contents for SIP- T28P

Reviews:

Related manuals for SIP- T28P

Brands by name

Popular brands