Yealink SIP- T28P User Manual Download Page 51

Page: 51 / 137

User Guide SIP-T28P IP Phone

The phone connects to load the BroadSoft call log, and then displays the desired
call log list on the LCD screen.

Press the Back soft key to back to the previous interface.

To check the BroadSoft call log:

Press Menu->History Type->Network CallLog.

Select the desired call log menu, and then press the Enter soft key to load the
BroadSoft call log.

Select the desired contact in the BroadSoft call log list.

Press the Detail soft key.

The detailed information of the entry appears on the LCD screen.

To dial a call from the BroadSoft call log list:

Press Menu->History Type->Network CallLog.

Select the desired call log menu, and then press the Enter soft key to load the
BroadSoft call log.

Select the desired contact in the BroadSoft call log list.

Press the Dial soft key.

Summary of Contents for SIP- T28P










































































































































Search results

Summary of Contents for SIP- T28P

Reviews:

Related manuals for SIP- T28P

Brands by name

Popular brands

Yealink SIP- T28P, User Manual

Search results

Summary of Contents for SIP- T28P

Reviews:

Related manuals for SIP- T28P

Brands by name

Popular brands