Yealink SIP- T28P User Manual Download Page 31

Page: 31 / 137

User Guide SIP-T28P IP Phone

Press the Save soft key to accept the change or the Back soft key to cancel.

You can also configure contrast via web user interface at the path Phone->Preference.

You can configure the backlight status on the LCD screen as the following types:



Always Off: Backlight is turned off completely.



Always On: Backlight is on permanently.



15, 30, 60,120: Backlight is turned off when the phone is inactive for the specified
time (in seconds).

To configure the backlight via phone user interface:

Press Menu->Settings->Advanced Settings (password: admin) ->Phone
Settings->Backlight.

Press or , or the Switch soft key to select the desired level from the
Backlight Level field.

Press or , or the Switch soft key to select the desired type from the
Backlight Time field.

Press the Save soft key to accept the change or the Back soft key to cancel.

You can also configure the backlight via web user interface at the path
Phone->Preference.

Note

Backlight Level means the backlight intensity.

Summary of Contents for SIP- T28P










































































































































Search results

Summary of Contents for SIP- T28P

Reviews:

Related manuals for SIP- T28P

Brands by name

Popular brands

Yealink SIP- T28P, User Manual

Search results

Summary of Contents for SIP- T28P

Reviews:

Related manuals for SIP- T28P

Brands by name

Popular brands