Yealink SIP- T28P User Manual Download Page 27

Page: 27 / 137

User Guide SIP-T28P IP Phone

You can view the system status of your phone via phone user interface or web user
interface.

Available information of phone status includes:



Network status including WAN port and LAN port information.



Phone status including device model, firmware version and MAC address.



Account status indicating the register status of sip accounts.

To view the phone status via phone user interface:

Press , or press Menu->Status.

Press or to scroll through the list and view the specific information.

To view the phone status via web user interface:

Open the web browser of your computer.

Enter the IP address in the browser’s address bar, and then click Enter.

Enter the User Name (admin) and Password (admin) in the pop-up dialogue

box.

Click OK to log in.

If your phone cannot contact a DHCP server for any reason, you need to configure a
static IP address manually.

To configure a static IP address via phone user interface:

Press Menu->Settings->Advanced Settings (password: admin) ->Network->WAN
Port->Static IP Client.

Summary of Contents for SIP- T28P










































































































































Search results

Summary of Contents for SIP- T28P

Reviews:

Related manuals for SIP- T28P

Brands by name

Popular brands

Yealink SIP- T28P, User Manual

Search results

Summary of Contents for SIP- T28P

Reviews:

Related manuals for SIP- T28P

Brands by name

Popular brands