Yealink SIP- T28P User Manual Download Page 118

Page: 118 / 137

Advanced Phone Features

107

Press or , or the Switch soft key to select ACD from the Type field.

Press or , or the Switch soft key to select the desired line from the Account
ID field.

Press the Save soft key to accept the change or the Back soft key to cancel.

You can also configure an ACD key via web user interface at the path Phone->DSS
Keys.

To use the ACD feature:

Press the ACD key when the phone is idle.

The phone LCD screen prompts you the following information:

User ID: the phone number used to log in the queue.

Password: the password used to log in the queue.

Press the Log In soft key to log in.

Note

Contact your system administrator for the User ID and Password to access the ACD
system.

Summary of Contents for SIP- T28P










































































































































Search results

Summary of Contents for SIP- T28P

Reviews:

Related manuals for SIP- T28P

Brands by name

Popular brands

Yealink SIP- T28P, User Manual

Search results

Summary of Contents for SIP- T28P

Reviews:

Related manuals for SIP- T28P

Brands by name

Popular brands