Yealink SIP- T28P User Manual Download Page 63

Page: 63 / 137

User Guide SIP-T28P IP Phone

Press the Save soft key to accept the change or the Back soft key to cancel.

Repeat steps 2 to 5 until you have registered all accounts.

The following figures show single or multiple accounts registered on the phone:

Single account:

Multiple accounts:

To disable an account via phone user interface:

Press Menu->Settings->Advanced Settings (password: admin) ->Accounts.

Select the desired account and then press the Enter soft key.

Select Disable from the Activation field.

Press the Save soft key to accept the change or the Back soft key to cancel.

You can also register or disable an account via web user interface at the path
Account->Basic>>.

Summary of Contents for SIP- T28P










































































































































Search results

Summary of Contents for SIP- T28P

Reviews:

Related manuals for SIP- T28P

Brands by name

Popular brands

Yealink SIP- T28P, User Manual

Search results

Summary of Contents for SIP- T28P

Reviews:

Related manuals for SIP- T28P

Brands by name

Popular brands