Yealink SIP- T28P User Manual Download Page 130

Page: 130 / 137

Troubleshooting

119

To Import phone configurations via web user interface:

Click on Upgrade->Advanced.

Click Browse to select a configuration file from your local system.

Click Import to import the configuration file.

Note

How to make a call using SRTP?

You can enable SRTP to encrypt the audio stream(s) of phone calls. The parties
participating in the call should enable SRTP. You can enable SRTP on per-account basis.

To enable SRTP via web user interface:

Click

on Account.

Select the desired account from the pull-down list of Account.

Click on Advanced>>.

Mark the On radio box in the Voice Encryption (SRTP) field.

Click Confirm to accept the change.

Note

The file format of configuration file must be “.bin”.

The SRTP feature is not available on all servers. Contact your system administrator for

more information

Summary of Contents for SIP- T28P










































































































































Search results

Summary of Contents for SIP- T28P

Reviews:

Related manuals for SIP- T28P

Brands by name

Popular brands

Yealink SIP- T28P, User Manual

Search results

Summary of Contents for SIP- T28P

Reviews:

Related manuals for SIP- T28P

Brands by name

Popular brands