Administrator’s Guide for Yealink VC800&VC500 Video Conferencing System
30
TLV Type
TLV Name
Description
Asset ID
Assertion identifier of the system.
Parameters of LLDP feature on the system are described below.
Parameter
Description
Configuration Method
LLDP
->
Active
Enables or disables LLDP feature on
the system.
Default:
Enabled
Note
: If you change this parameter,
the system will reboot to make the
change take effect.
Remote Control
Web User Interface
Packet
Interval(1-3600s)
Configures the interval (in seconds)
for the system to send LLDP
requests.
Default:
60
Note
: If you change this parameter,
the system will reboot to make the
change take effect.
Remote Control
Web User Interface
To configure LLDP via web user interface:
1.
Click on
Network
->
Advanced
.
2.
In the
LLDP
block, select the desired value from the pull-down list of
Active
.
Summary of Contents for MeetingSpace VC500
