Yealink MeetingSpace VC500, Administrator'S Manual

Page: 37 / 281

Configuring Network
21
4.
Click
OK
to reboot the phone.
To configure a static IPv4 address via web user interface:
1.
Click on
Network
->
LAN Configuration
.
2.
In the
IPv4 Config
block, mark the
Static IP
radio box.
3.
Enter the desired values in the
IP Address
,
Subnet Mask
,
Gateway
,
Primary DNS
and
Secondary DNS
fields.
4.
Click
Confirm
to accept the change.
A dialog box pops up to prompt that settings will take effect after a reboot.
5.
Click
Confirm
to reboot the system immediately.
To configure the IP address mode via phone user interface:
1.
Select
More
->
Setting
->
Advanced
(default password: 0000) ->
Internet Configuration
.
2.
Select
IPv4
or
IPv4 & IPv6
from the
IP Mode
field.
3.
Select
Save
, and then press to accept the change.
The IP phone reboots automatically to make settings effective after a period of time.
To configure a static IPv4 address via phone user interface
：
1.
Select
More
->
Setting
->
Advanced
(default password: 0000) ->
Internet
Configuration
->
IPv4
.
2.
Uncheck the
DHCP
checkbox.
3.
Enter the desired values in the
IP Address
,
Subnet Mask
,
Gateway
,
DNS Primary Server
and
DNS Secondary Server
fields respectively.
4.
Select
Save
, and then press to accept the change.
The display device prompts “Reboot now?”.
5.
Select
OK
, and then press to reboot the system immediately.