Yealink MeetingSpace VC500, Administrator'S Manual

Page: 251 / 281

Configuring Security Features
235
Parameter Description Configuration Method
Available stop bits are:

1

2
Default:
1
Note
: It must be the same stop bits
for control system and Yealink video
conferencing system.
To configure control system via web user interface:
1.
Click on
Security
->
Security Control
.
2.
Select the desired value from the pull-down lists of
Control Security Enabled
.
3.
Enter the desired password in the
Control Security Password
field.
4.
Select the desired value from the pull-down lists of
Baud Rate
.
5.
Select the desired value from the pull-down lists of
Data Bits
.
6.
Select the desired value from the pull-down lists of
Parity
.
7.
Select the desired value from the pull-down lists of
Stop Bits
.
8.
Click
Confirm
to accept the change.