Yealink CD860, Administrator'S Manual

Page: 139 / 1039

Configuring Basic Features
117
3. Press the Save soft key to accept the change.
The screen saver will automatically start each time the IP phone is idle for a certain
amount of time. You can stop the screen saver and return to the idle screen at any time
by pressing a key on the phone or tapping the touch screen (only applicable to SIP
VP-T49G and SIP-T48G IP phones). The screen saver is only applicable to SIP VP-T49G,
SIP-T48G, SIP-T46G and SIP-T29G IP phones.
Users can select to display the built-in screen saver or custom screen saver. To set the
custom screen saver for the IP phone, you need to upload the custom screen saver in
advance. If multiple pictures are uploaded, all pictures are displayed like a slide show
when screen saver starts.
The screen saver image format must meet the following:
Phone Model Format Resolution Single File Size Total File Size
SIP VP-T49G .jpg/.png/.bmp <=1280*800 <=5MB <=20MB
SIP-T48G .jpg/.png/.bmp <=800*480 <=5MB <=20MB
SIP-T46G/T29G .jpg/.png/.bmp <=480*272 <=5MB <=20MB
Procedure
Screen saver can be configured using the configuration files or locally.
Configuration File <y0000000000xx>.cfg
Configure the time to wait in
the idle state before the
screen saver starts.
Parameter:
screensaver.wait_time
Configure the type of screen
saver to display.
Parameter:
screensaver.type
Specify the access URL of
the custom screen saver
image.
Parameter:
screensaver.upload_url