Yealink CD860, Administrator'S Manual

Page: 852 / 1039

Administrator’s Guide for SIP-T2 Series/T19(P) E2/T4 Series/CP860 IP Phones
830
Details of Configuration Parameters:
Parameters
Permitted
Values
Default
account.X.video.Y.enable
(X ranges from 1 to 16, Y ranges from 1 to 4)
0 or 1 1
Description:
Enables or disables the specified video codec for account X.
0-Disabled
1-Enabled
Default:
When Y=1, the default value is 1;
When Y=2, the default value is 1;
When Y=3, the default value is 1;
When Y=4, the default value is 1;
Example:
If you want to enable the codec H264 on the account 1, you need to configure the
following two parameters:
account.1.video.1.enable = 1
account.1.video.2.enable = 1
If you want to enable the codec H264HP on the account 1, you need to configure
the following parameter:
account.1.video.3.enable = 1
If you want to enable the codec H263 on the account 1, you need to configure the
following parameter:
account.1.video.4.enable = 1
Note: It is only applicable to SIP VP-T49G IP phones.
Web User Interface:
Account->Codec->Video Codec
Phone User Interface:
None
account.X.video.Y.payload_type
(X ranges from 1 to 16, Y ranges from 1 to 4)
H264 or H263
Refer to the
following content
Description:
Configures the video codec for account X.
Default:
When Y=1, the default value is H264;