4 System Startup and Sample Programs
4.2.2 Setting Motion Fixed Parameters and Adjusting the Settings for Servo Control
4-18
3.
Set the fixed parameters for axis 1.
Select
Axis 1
from the axis selection box at the top-left of the window and select
mm
under
No. 4 Reference unit
selection
on the
Fixed Parameters
Tab Page.
4.
In the
Engineering Manager
Window, select
File - Save
to save the settings for axis 1 fixed
parameters.
5.
Follow steps 3 and 4 to set and save the fixed parameters for axis 2 as well.
The process for saving fixed parameter settings has now been completed. Next, save the SERVOPACK parameters.
