5 Outline of Motion Control Systems
5.5.1 Precautions when Setting or Changing User Definition Files
5-38
5.5 Precautions When Using the MP2300
This section describes precautions for setting or changing user definition files and for setting the scan times.
5.5.1 Precautions when Setting or Changing User Definition Files
User definition files (system settings, scan time settings, and module configuration definitions) must be saved to flash
memory (
Save & Save to Flash
).
Use the MPE720 to set or change these user definition files. Be sure to save the results to flash memory. If data is not
saved to flash memory, the settings and changes will be lost when the power supply to the MP2300 is turned OFF and
ON.
<When Using MPE720 Ver 6.
>
System Setting (Select
File
-
Environment Setting
-
Setup
-
System Setting
from the menu bar.)
Scan Time Setting (Select
File
-
Environment Setting
-
Setup
-
Scan Time Setting
from the menu bar.)
