B Current Values and Set Values (Input Data) in the SVB Definition Window
A-6
( 3 ) When the SERVOPACK Tab Page Is Open
The data flow for SERVOPACK parameters is as follows when the SERVOPACK Tab Page is open in the SVB
Definitions Window on the MPE720 (refer to
2.2.5 ( 2 ) [ a ] Opening the SVB Definition Window
on page 2-22
for
details on how to open the
SERVOPACK
Tab Page.):
• The MPE720 writes and displays the parameters that are held in the SERVOPACK’s RAM for the relevant axis to
the
Current Value
in the
SERVOPACK
Tab Page.
It also reads and displays the values that are held in the MP2300’s SDRAM values to the
Input Data
in the
SERVO-
PACK
Tab.
The following figure shows an example of the
SERVOPACK
Tab in the
SVB Definition
Window. The values in
Cur-
rent Value
are different from the values in
Input Data
.
SDRAM
SRAM
EEP
-ROM
RAM
MECHATROLINK
Input
Data
MPE720 (online)
HDD in personal computer
Display
Current
Value
Input
Data
MP2300
Send
Send
SERVOPACK
SERVOPACK
Control
Software
System
Software
Parameters
SERVOPACK
Parameters
(All Axes)
Flash
Memory
