YASKAWA L1000A CIMR-LC F Series, Technical Manual Addendum

Page: 50 / 106

6 DCP Interface
50 YASKAWA TOEPC710616134G AC Drive L1000A Technical Manual Addendum
■
Premature Termination of the 'Fast-Start Function'
There are some situations where it is necessary to abort the 'Fast-Start Function'. Examples for these situations
are:
•
The doors are reversing (opening again).
•
A time-out occurs (e.g. the doors can't be closed because they are blocked).
•
A fault occurs (e.g. motor thermistor or a leaving of the door zone).
In principle, there are two ways how the 'Fast-Start Function' can be aborted:
•
Immediate termination regardless of the state of the drive controller's status bit S6 'mechanical brake'.
•
Premature termination considering the state of the drive controller's status bit S6 'mechanical brake'.
Immediate Termination Regardless of S6 'Mechanical Brake' Status :
The 'Fast-Start Function' can be terminated immediately by clearing the lift controller's command byte.
Note:
A termination of the 'Fast-Start Function' regardless of the state of the drive controller's status bit S6 'mechanical brake' can cause a
drifting of the car and a disconnection of the main contactors under load. Therefore, whenever possible, termination considering the
state of the drive controller's status bit S6 'mechanical brake' should be preferred.