Yamaha XSR900 2022, Service Manual

Page: 18 / 726

1-9
FEATURES
“Shift Indicator”
This module allows a custom shift indicator to be
set. When the engine r/min (rotations per min-
ute) are in the specified range, the gear indicator
will flash.
This module has 3 options:
“IND Mode” - the shift indicator can be turned
ON/OFF
“IND Start” - the r/min at which the indicator
starts flashing can be chosen.
Once selected, rotate the wheel switch up/down
to increase or decrease the r/min value by incre-
ments of 200 r/min.
“IND Start” is settable between 6000–12800 r/
min.
“IND Stop” - the r/min at which the indicator
stops flashing can be chosen.
Once selected, rotate the wheel switch up/down
to increase or decrease the r/min value by incre-
ments of 200 r/min.
“IND Stop” is settable between 6200–13000 r/
min.
“Maintenance”
This module allows you to record the distance
traveled between engine oil changes (use the
OIL item), and for two other items of your choice
(use INTERVAL 1 and INTERVAL 2).
To reset a maintenance trip meter, select it and
then press and hold the wheel switch.
TIP
Maintenance item names cannot be changed.
“Unit”
This module allows you to switch the display be-
tween metric and imperial measurement units.
When using kilometers, the fuel consumption
units can be changed between “km/L” or “L/
100km”. When using miles, MPG will be avail-
able.
Temperature units can be switched between
Celsius and Fahrenheit.
“Brightness”
This module allows you to adjust the general
brightness level of the display screen.
Select the desired brightness level by rotating
the wheel switch, and then press the wheel
switch to fix the setting and return to the top
MENU screen.
km/h
Shift Indicator
IND Mode ON
IND Start 8000 r/min
IND Stop 10000 r/min
OIL
INTERVAL 1
km/h
km
1 0 0 0
km
1 0 0 0
km
Maintenance
INTERVAL 2 1 0 0 0
km or mile
km
L/100km
°C
km/L or L/100km
°C or °F
km/h
Unit
km/h
Brightness
1