Yamaha XSR900 2022, Service Manual

Page: 626 / 726

9-220
P0916, P0917
4. Installed condition of gear position sensor.
• Check for looseness or pinching.
Refer to “CRANKCASE” on page 5-64.
5. Defective gear position sensor.
• Make sure that the position of each gear is correctly displayed on the meter.
Is resistance
∞ Ω
?
YES
→
Go to step 4.
NO
a. Replace the wire harness.
b. Turn the main switch to “ON”, and then check the DTC using the malfunction mode of the YDT.
Is it in the “Recovered” condition?
YES
→
Go to step 7, and complete the service.
NO
→
Go to step 4.
Is check result OK?
YES
→
Go to step 5.
NO
a. Reinstall or replace the sensor.
b. Turn the main switch to “ON”, and then check the DTC using the malfunction mode of the YDT.
Is it in the “Recovered” condition?
YES
→
Go to step 7, and complete the service.
NO
→
Go to step 5.
Is check result OK?
YES
→
Go to step 6.
NO
a. Replace the gear position sensor.
Refer to “CRANKCASE” on page 5-64.
b. Turn the main switch to “ON”, and then check the DTC using the malfunction mode of the YDT.
Gy L L V P P/W Lg/L O/W Y/L L/B
B/L B/L Br/W Gy/G G/L Br/L B/Y L/W
W/Y W/G G/W G/W Lg/B L/W L/Y
L G/W B/L
L G/W B/L
A B
1 2 1