Yamaha TT-R125LW, Owner'S Service Manual

Page: 174 / 468

3 - 23
INSP
ADJ
TIRE PRESSURE CHECK
NOTE:
●
Be sure to remove all dirt and mud from
around the locknut and adjuster before
adjustment.
●
The length of the spring (installed) changes
1.5 mm (0.06 in) per turn of the adjuster.
CAUTION:
Never attempt to turn the adjuster beyond
the maximum or minimum setting.
5. Tighten:
●
Locknut
6. Install:
●
Left side cover
T
R
.
.
42 Nm (4.2 m · kg, 30 ft · lb)
T
R .
.
7 Nm (0.7 m · kg, 5.1 ft · lb)
EC36Q000
TIRE PRESSURE CHECK
1. Measure:
●
Tire pressure
Out of specification
→
Adjust.
NOTE:
●
Check the tire while it is cold.
●
Loose bead stoppers allow the tire to slip off
its position on the rim when the tire pressure
is low.
●
A tilted tire valve stem indicates that the tire
slips off its position on the rim.
●
If the tire valve stem is found tilted, the tire is
considered to be slipping off its position. Cor-
rect the tire position.
Standard tire pressure:
100 kPa (1.00 kg/cm
2
, 15 psi)