5 - 40
CHAS
FRONT FORK
Installation
1. Install:
●
Front fork
NOTE:
●
Temporarily tighten the pinch bolt (lower
bracket).
●
Do not tighten the pinch bolt (upper bracket)
yet.
2. Tighten:
●
Cap bolt
1
3. Adjust:
●
Front fork top end
a
Front fork top end (standard)
a
:
Zero mm (Zero in)
T
R
.
.
23 Nm (2.3 m · kg, 17 ft · lb)
4. Tighten:
●
Pinch bolt (lower bracket)
1
●
Pinch bolt (upper bracket)
2
●
Screw (dust boot)
3
NOTE:
●
Make sure that the dust boot holes
a
are
positioned outward.
●
Tighten the screw (dust boot) until the top of
the dust boot is touching the lower bracket.
T
R
.
.
60 Nm (6.0 m · kg, 43 ft · lb)
T
R
.
.
25 Nm (2.5 m · kg, 18 ft · lb)
5. Install:
●
Cap
1
