4 - 60
ENG
CDI MAGNETO
2. Install:
●
Woodruff key
1
●
Rotor
2
NOTE:
●
Clean the tapered portions of the crankshaft
and rotor.
●
When installing the woodruff key, make sure
that its flat surface
a
is in parallel with the
crankshaft center line
b
.
●
When installing the rotor, align the keyway of
the rotor with the woodruff key.
3. Install:
●
Plain washer
1
●
Nut (rotor)
2
Use the sheave holder
3
.
Sheave holder:
YS-1880-A/90890-01701
T
R
.
.
80 Nm (8.0 m · kg, 58 ft · lb)
4. Install:
●
Dowel pin
●
Gasket
●
Left crankcase cover
●
Bolt (left crankcase cover)
NOTE:
Tighten the screws in stage, using a crisscross
pattern.
New
T
R
.
.
10 Nm (1.0 m · kg, 7.2 ft · lb)
5. Connect:
●
CDI magneto lead
Refer to “CABLE ROUTING DIA-
GRAM” section in the CHAPTER 2.
