3 - 26
INSP
ADJ
STEERING HEAD INSPECTION AND ADJUSTMENT
3. Check:
●
Steering smooth action
Turn the handlebar lock to lock.
Unsmooth action
→
Adjust steering ring
nut.
4. Adjust:
●
Steering ring nut
Steering ring nut adjustment steps:
●
Remove the number plate and starter
knob.
●
Remove the handlebar and upper bracket.
●
Remove the special washer
1
●
Remove the upper ring nut
2
, and rubber
washer
3
.
●
Loosen the lower ring nut
4
using the
steering nut wrench
5
.
Steering nut wrench:
YU-33975/90890-01403
●
Tighten the lower ring nut
6
using steer-
ing nut wrench
7
and turn the steering
right and left a few times.
Steering nut wrench:
YU-33975/90890-01403
T
R
.
.
Lower ring nut (initial tightening):
38 Nm (3.8 m • kg, 27 ft • lb)
●
Loosen the lower ring nut one turn.
●
Retighten the lower ring nut using the
steering nut wrench.
NOTE:
Set the torque wrench to the steering nut
wrench so that they form a right angle.
WARNING
Avoid over-tightening.
