3
PERIODIC MAINTENANCE TABLE
INSP
ADJ
2
NOTE:
Initial
Every
Item
Remarks
Preopera-
tion check
(Daily)
1 month
or
800 km
(500 mi)
(40 hr)
Seasonally
or
3,200 km
(2,000 mi)
(160 hr)
Check operation and fluid leakage.
F
Brake and parking brake
*Adjust free play and/or replace pads if neces-
sary.
F
*Repair brake fluid.
See NOTE.
*Disc brake installation
Check for slight free play.
Lubricate shaft with specified grease as
required.
Every
1,600 km
(1,000 mi)
Drive chain oil
Check oil level.
F
Drive chain oil
*Replace.
F
Drive chain
Check deflection.
*Adjust if necessary.
Initial at 500 km (300 mi) and every
800 km (500 mi) thereafter.
Skis and ski runners
Check for wear and damage.
F
Skis and ski runners
*Repair if necessary.
F
Steering system
Check operation.
F
Steering system
*Adjust toe-out if necessary.
F
Lights
Check operation.
Replace bulbs if necessary.
F
Check engagement and shift speed
F
Check engagement and shift s eed.
Adjust if necessary.
Whenever operating elevation is
changed.
*Primary and secondary
clutches
Inspect sheaves for wear / damage.
Inspect weights / rollers and bushings for
wear-for primary.
Inspect ramp shoes / bushings for wear-for
secondary.
Replace if necessary.
F
Lubricate with specified grease.
F
*Steering column bearing
Lubricate with specified grease.
F
*Ski and front suspension
Lubricate with specified grease.
F
*Suspension component
Lubricate with specified grease.
F
*Parking brake cable end
Lubricate with specified grease.
F
g
and lever end / throttle
cable end
Check cable damage.
Replace if necessary.
F
Shroud latches
Make sure that the shroud latches are hooked.
F
Fittings and fasteners
Check tightness.
*Replace if necessary.
F
Tool kit and recommended
equipment
Check for proper placement.
F
* It is recommended that these items be servised by a Yamaha dealer.
Brake fluid replacement:
1. When disassembling the master cylinder or caliper cylinder, replace the brake fluid. Normally check
the brake fluid level and add the fluid as required.
2. On the inner parts of the master cylinder and caliper cylinder, replace the oil seals every two years.
3. Replace the brake hoses every four years, or if cracked or damaged.
Summary of Contents for RX10K
