![background image](http://html.mh-extra.com/html/yamaha/motif-rack-es/motif-rack-es_owners-manual_902713047.webp)
Owner’s Manual
Using the Jobs Performing a Job
47
Quic
k Guide
Using the Jobs
There are six data-related operations (Jobs) in the Utility mode: Initialize, Copy, Bulk Dump, Plug-in Save, Plug-in Load and Factory Set.
Here for example, you can initialize Voices/Performance/Multis to their original settings (including those currently being edited) or copy
Elements/Parts.
Performing a Job
1.
In each mode, select the Voice/Performance/Multi you
wish to perform the Job on.
2.
Press the [UTILITY] button to enter the Utility.
3.
Use the PAGE [
E
][
F
] buttons to select the “JobSel”
display (the last page), then select the desired Job with
the cursor [
L
][
M
] buttons.
4.
Press the [MUTE/SEL/ENTER] button.
The selected Job is displayed.
5.
If “Initialize”, “Copy”, “Bulk Dump” or “Plug-in Save” is
selected, change the settings with the cursor [
L
][
M
]
buttons and the data dial.
6.
Press the [MUTE/SEL/ENTER] button.
At the prompt, press [MUTE/SEL/ENTER] again to execute the Job,
or press the [EXIT] button to cancel.
7.
Press the [MUTE/SEL/ENTER] button to execute the
Job.
A “Completed” Message appears when the Job has been
completed.
For Jobs that take longer to process, an “Executing…” message appears
during processing. Never attempt to turn off the power while data is being
written to internal memory (while an “Executing...” or “Please keep power on”
message is shown). Turning the power off in this state results in loss of all
user data.
8.
Press the [EXIT] button to return to the Utility mode.
To exit back to the previous mode, press the [EXIT] button again.
Initialize (resetting parameters of a
Voice/Multi to their default settings)
This is useful for setting up a “blank slate” when you want to build
a completely new Voice/Performance/Multi from scratch. Keep in
mind that this does not return the Voice/Multi to its original state
prior to editing.
Select the target data (you wish to initialize) with the cursor [
L
][
M
]
buttons and turn the data dial to checkmark the box next to the
data.
Parameter Type to be initialized
Voice Mode
n
When a Plug-in Voice is selected, only one Element appears in the display
(page 25).
Performance mode
Multi Mode
n
You can also use the Part/Element buttons ([1/5/9/13]-[4/8/12/16]) to select the
Part or Element.
When “All User Voice,” “All User Performance,” or “All User Multi” is checkmarked,
executing the initialize operation results in loss of all user Voice/Performance/
Multi data. Be careful not to initialize any important data.
CAUTION
All User Voice
All Voices in the User Banks
Current 1 Voice (All)
Currently selected Voice (all parameters)
Common
Common data for currently selected Voice
EL 1-4
(Normal Voice) Element data for currently selected
Voice
EL C0-C6
(Drum Voice) Key data for currently selected Voice
All User Performance
All Performances
Current 1 Perf (All)
Currently selected Performance (all parameters)
Common
Common data for currently selected Performance
P1-4
Part 1-4 data for currently selected Performance
PLG1-2
Plug-in Part data for currently selected Performance
All User Multi
All Multis
Current 1 Multi (All)
Currently selected Multi (all parameters)
Common
Common data for currently selected Multi
P1-16
Part 1-16 data for currently selected Multi
PLG1-2
Plug-in Part data for currently selected Multi
Parameter Type
to be initialized
CAUTION