Yamaha GRIZZLY 700 FI YFM7FGPW, Service Manual

Page: 454 / 485

9 - 49
– +
ELEC
COOLING SYSTEM
EBS00812
YES NO
EBS01090
YES
NO
7. Coolant temperature sensor
• Remove the coolant temperature sensor
from the cylinder head.
• Connect the pocket tester (
Ω ×
100) to the
coolant temperature sensor
1
as shown.
• Immerse the coolant temperature sensor
in a container filled with coolant
2
.
NOTE:
_
Make sure the coolant temperature sensor
terminals do not get wet.
• Place a thermometer
3
in the coolant.
• Slowly heat the coolant, and then let it cool
to the specified temperature indicated in
the table.
• Measure the coolant temperature sensor
resistance.
Coolant temperature sensor
resistance
290 ~ 354
Ω
at 80 °C (176 °F)
WARNING
_
• Handle the coolant temperature sensor
with special care.
• Never subject the coolant temperature
sensor to strong shocks. If the coolant
temperature sensor is dropped, replace
it.
T
R
.
.
Coolant temperature sensor
18 Nm (1.8 m · kg, 13 ft · lb)
• Does the coolant temperature sensor
operate properly?
Replace the coolant
temperature sensor.
8. Wiring
• Check the entire cooling system’s wiring.
Refer to “CIRCUIT DIAGRAM”.
• Is the cooling system’s wiring properly
connected and without defects?
Replace the ECU. Properly connect or
repair the cooling
system’s wiring.