Yamaha GRIZZLY 700 FI YFM7FGPW, Service Manual

Page: 203 / 485

4 - 45
ENG
AC MAGNETO
EBS00259
REMOVING THE AC MAGNETO ROTOR
1. Remove:
• lead holder
1
• AC magneto cover
NOTE:
_
Loosen each bolt 1/4 of a turn at a time, in
stages and in a crisscross pattern. After all of
the bolts are fully loosened, remove them. 1
2. Remove:
• AC magneto rotor nut
1
• washer
NOTE:
_
• While holding the AC magneto rotor
2
with
the sheave holder
3
, loosen the AC mag-
neto rotor nut.
• Do not allow the sheave holder to touch the
projection on the rotor.
Sheave holder
90890-01701
Primary clutch holder
YS-01880-A
3
2
1
3. Remove:
• AC magneto rotor
1
(with the starter clutch)
• woodruff key
CAUTION:
To protect the end of the crankshaft, place
an appropriate sized socket between the
flywheel puller set center bolt and the
crankshaft.
NOTE:
• Use the flywheel puller
2
.
• Install the flywheel puller bolts to the
threaded holes of the starter clutch.
• Make sure the flywheel puller is centered
over the AC magneto rotor.
2
1