Yamaha GRIZZLY 700 FI YFM7FGPW, Service Manual

Page: 302 / 485

6 - 30
FI
FUEL TANK
REMOVING THE FUEL TANK
1. Extract the fuel in the fuel tank through the
fuel tank cap with a pump.
2. Remove:
• fuel hose connector holder
• fuel hose
CAUTION:
• Be sure to disconnect the fuel hose by
hand. Do not forcefully disconnect the
hose with tools.
• Although the fuel has been removed from
the fuel tank be careful when removing
the fuel hose, since there may be fuel
remaining in it.
NOTE:
• When removing the fuel hose from the fuel
pump, remove the fuel hose connector
holder first, and next, insert a slotted head
screwdriver etc. in the slot part
a
of the fuel
hose connector cover
1
, then slide it in the
direction of the arrow, and remove the fuel
hose.
• To remove the fuel hose from the throttle
body, slide the fuel hose connector cover
2
on the end of the hose in direction of the
arrow shown, press the two buttons
3
on the
sides of the connector, and then remove the
hose.
• Before removing the hose, place a few rags
in the area under where it will be removed.
3. Remove:
• fuel tank
NOTE:
Do not set the fuel tank down on the installa-
tion surface of the fuel pump. Be sure to lean
the fuel tank against a wall or like.
REMOVING THE FUEL PUMP
1. Remove:
• fuel pump bracket
• fuel pump
• fuel pump gasket