Yamaha GRIZZLY 700 FI YFM7FGPW, Service Manual

Page: 412 / 485

9 - 7
– +
ELEC
CHECKING THE BULBS AND BULB SOCKETS
EBS01030
CHECKING THE BULBS AND
BULB SOCKETS
Check each bulb and bulb socket for damage
or wear, proper connections, and also for con-
tinuity between the terminals.
Damage/wear
→
Repair or replace the
bulb, bulb socket or both.
Improperly connected
→
Properly connect.
No continuity
→
Repair or replace the bulb,
bulb socket or both.
TYPES OF BULBS
The bulbs used on this vehicle are shown in
the illustration on the left.
• Bulbs
a
and
b
are used for the headlights
and usually use a bulb holder that must be
detached before removing the bulb. The
majority of these types of bulbs can be
removed from their respective socket by
turning them counterclockwise.
• Bulbs
c
is used for turn signal and tail/
brake lights and can be removed from the
socket by pushing and turning the bulb
counterclockwise.
• Bulbs
d
and
e
are used for meter and indi-
cator lights and can be removed from their
respective socket by carefully pulling them
out.