Yamaha GRIZZLY 700 FI YFM7FGPW, Service Manual

Page: 103 / 485

3 - 22
CHK
ADJ
ADJUSTING THE SPEED LIMITER
EBS00053
ADJUSTING THE SPEED LIMITER
The speed limiter keeps the throttle from
becoming fully-opened even when the throttle
lever is applied to the maximum position.
Screwing in the adjusting screw stops the
engine speed from increasing.
1. Measure:
• speed limiter length
a
Out of specification
→
Adjust.
2. Adjust:
• speed limiter length
▼▼▼ ▼ ▼ ▼▼▼ ▼ ▼ ▼▼▼ ▼ ▼ ▼▼▼ ▼ ▼ ▼▼▼ ▼ ▼ ▼▼▼ ▼ ▼▼▼
a. Loosen the locknut
1
.
b. Turn the adjuster
2
in direction
b
or
c
until the specified speed limiter length is
obtained.
c. Tighten the locknut.
WARNING
_
• Particularly for a beginner rider, the
speed limiter should be screwed in com-
pletely. Screw it out little by little as their
riding technique improves. Never remove
the speed limiter for a beginning rider.
• For proper throttle lever operation do not
turn out the adjuster more than 12 mm
(0.47 in). Also, always adjust the throttle
lever free play to 3.0 ~ 5.0 mm (0.12 ~
0.20 in).
▲▲▲ ▲ ▲ ▲▲▲ ▲ ▲ ▲▲▲ ▲ ▲ ▲▲▲ ▲ ▲ ▲▲▲ ▲ ▲ ▲▲▲ ▲ ▲▲▲
Speed limiter length
Less than 12 mm (0.47 in)
Direction
b
Speed limiter length is
decreased.
Direction
c
Speed limiter length is
increased.