1 - 7
GEN
INFO
FEATURES
Clock mode
Pushing the “CLOCK” button switches the dis-
play between the clock mode “CLOCK” and
the hour meter mode “HOUR” in the following
order:
CLOCK
→
HOUR
→
CLOCK
To set the clock
1. Set the display to the clock mode.
2. Push the “SELECT” button and “RESET”
button together for at least three seconds.
3. When the hour digits start flashing, push
the “RESET” button to set the hours.
4. Push the “SELECT” button, and the
minute digits will start flashing.
5. Push the “RESET” button to set the min-
utes.
6. Push the “SELECT” button and then
release it to start the clock.
Fuel meter
The fuel meter indicates the amount of fuel in
the fuel tank. The display segments of the fuel
meter disappear from “F” (full) towards “E”
(empty) as the fuel level decreases. When the
“E” segment disappears and the fuel level
warning indicator flashes, refuel as soon as
possible.
NOTE:
This fuel meter is equipped with a self-diagno-
sis system. If the electrical circuit is defective,
all the display segments and fuel level warning
indicator will start flashing. If this occurs, check
the electrical circuit.
Refer to “SIGNALING SYSTEM” in chapter 9.
1
Fuel level warning indicator
2
Fuel meter
3
“E” segment
1
2
3
Summary of Contents for GRIZZLY 700 FI YFM7FGPW
