FUEL INJECTION SYSTEM
8-84
Item
Probable cause of malfunc-
tion and check
Maintenance job
Confirmation of service com-
pletion
1
Installed condition of O
2
sensor. Check for looseness or pinch-
ing.
Improperly installed sensor
→
Reinstall or replace the sensor.
Turn the main switch to “ON”,
and then check the condition of
the fault code using the mal-
function mode of the Yamaha di-
agnostic tool.
Condition is “Recovered”
→
Go
to item 7 and finish the service.
Condition is “Detected”
→
Go to
item 2.
2
Connection of O
2
sensor cou-
pler.
Check the locking condition of
the coupler.
Disconnect the coupler and
check the pins (bent or broken
terminals and locking condition
of the pins).
Improperly connected
→
Con-
nect the coupler securely or re-
place the wire harness.
Turn the main switch to “ON”,
and then check the condition of
the fault code using the mal-
function mode of the Yamaha di-
agnostic tool.
Condition is “Recovered”
→
Go
to item 7 and finish the service.
Condition is “Detected”
→
Go to
item 3.
3
Connection of wire harness
ECU coupler.
Check the locking condition of
the coupler.
Disconnect the coupler and
check the pins (bent or broken
terminals and locking condition
of the pins).
Improperly connected
→
Con-
nect the coupler securely or re-
place the wire harness.
Turn the main switch to “ON”,
and then check the condition of
the fault code using the mal-
function mode of the Yamaha di-
agnostic tool.
Condition is “Recovered”
→
Go
to item 7 and finish the service.
Condition is “Detected”
→
Go to
item 4.
4
Wire harness continuity.
Open or short circuit
→
Properly
connect or replace the wire har-
ness.
Between O
2
sensor coupler and
joint coupler.
black–black
Between joint coupler and ECU
coupler.
black/blue–black/blue
Between O
2
sensor coupler and
ECU coupler.
gray–gray
Turn the main switch to “ON”,
and then check the condition of
the fault code using the mal-
function mode of the Yamaha di-
agnostic tool.
Condition is “Recovered”
→
Go
to item 7 and finish the service.
Condition is “Detected”
→
Go to
item 5.
5
Defective O
2
sensor.
Check the O
2
sensor.
Defective
→
Replace the O
2
sensor.
Refer to “ENGINE REMOVAL”
on page 5-3.
Turn the main switch to “ON”,
and then check the condition of
the fault code using the mal-
function mode of the Yamaha di-
agnostic tool.
Condition is “Recovered”
→
Go
to item 7 and finish the service.
Condition is “Detected”
→
Go to
item 6.
6
Malfunction in ECU.
Replace the ECU.
Refer to “REPLACING THE
ECU (engine control unit)” on
page 8-250.
Fault code No.
P0132
Item
O
2
sensor: short circuit detected (power short circuit).
Summary of Contents for FJR13AG
