Yamaha FJR13AG, Service Manual

Page: 775 / 784

EVENT CODE TABLE
9-30
Procedure Hold the vehicle upright and place the vehicle on the sidestand.
Item
Probable cause of malfunc-
tion and check
Maintenance job
Confirmation of service com-
pletion
1 The vehicle has overturned. Raise the vehicle upright. Turn the main switch to “ON”,
then to “OFF”, and then back to
“ON”.
Engine trouble warning light
does not come on
→
Service is
finished.
Engine trouble warning light
comes on
→
Go to item 2.
2 Installed condition of IMU. Check the installed direction
and condition of the IMU.
Check the rubber components
for deterioration. Turn the main switch to “ON”,
then to “OFF”, and then back to
“ON”.
Engine trouble warning light
does not come on
→
Service is
finished.
Engine trouble warning light
comes on
→
Go to item 3.
3 Defective IMU. Execute the diagnostic mode.
(Code No. 17)
Replace if defective. Turn the main switch to “ON”,
then to “OFF”, and then back to
“ON”.
Engine trouble warning light
does not come on
→
Service is
finished.
Engine trouble warning light
comes on
→
Go to item 4.
4 Malfunction in ECU. Replace the ECU.
Refer to “REPLACING THE
ECU (engine control unit)” on
page 8-250. Service is finished.
Event code No. 30
Item Latch up detected.