Yamaha FJR13AG, Service Manual

Page: 29 / 784

FEATURES
1-20
Elapsed time display:
The time that has elapsed since the key was
turned to “ON” is shown. The maximum time that
can be shown is 99:59.
This timer automatically resets when the key is
turned to “OFF”.
TIP
There are also “TIME–2” and “TIME–3” elapsed
time displays, but they cannot be set to the infor-
mation display. See “Setting mode” on page
1-21 for detailed information.
Ambient temperature display:
This display shows the ambient temperature
from –9 °C to 50 °C in 1 °C increments. The tem-
perature displayed may vary from the ambient
temperature.
TIP
• –9 °C will be displayed even if the ambient tem-
perature falls below –9 °C.
• 50 °C will be displayed even if the ambient tem-
perature climbs above 50 °C.
• The accuracy of the temperature reading may
be affected when riding under 20 km/h (12
mi/h) or when stopped at traffic signals and rail-
road crossings.
Coolant temperature display:
The coolant temperature display indicates the
temperature of the coolant. The coolant tem-
perature varies with changes in the weather and
engine load.
If the message “Hi” flashes, stop the vehicle,
then stop the engine, and let the engine cool.
TIP
The selected information display cannot be
switched while the message “Hi” is flashing.
NOTICE
ECA20730
Do not continue to operate the engine if it is
overheating.
Average fuel consumption display:
The average fuel consumption display modes
“km/L”, “L/100km” or “MPG” show the average
fuel consumption since the display was last re-
set.
• The “km/L” display shows the average dis-
tance that can be traveled on 1.0 L of fuel.
0:06
TIME TRIP
25
A.TEMP ˚C
Lo
C.TEMP ˚C
GEAR
4
Hi
C.TEMP ˚C
12.3
FUEL AVG km/L