Yamaha 2 Owner'S Manual Download

Page: 60 / 240

Recording Audio to the Tyros2—Hard Disk Recorder

Quick Guide

Tyros2 Owner’s Manual

Press the HARD DISK RECORDER [REC] and [STOP] buttons
simultaneously.

This creates an audio file for recording.

Enter a name for the new file.

For instructions on naming, see page 76.

Press the [OK] LCD button (upper [8] button).

Press the [REC] button to enable recording.

To cancel recording, press the [REC] button again.

Now you’re ready to record. Press the [PLAY/PAUSE] button to start
recording.

Play the keyboard and record your performance.

When finished recording, press the [STOP] button.

These buttons are also marked
[NEW AUDIO], since they let you
create a new audio file.

Summary of Contents for 2

















































































































































































































































Search results

Summary of Contents for 2

Reviews:

Related manuals for 2

Brands by name

Popular brands

Yamaha 2, Owner'S Manual

Search results

Summary of Contents for 2

Reviews:

Related manuals for 2

Brands by name

Popular brands