Yamaha 2 Owner'S Manual Download Page 30

Page: 30 / 240

Playing Voices

Quick Guide

Tyros2 Owner’s Manual

Copy your favorite voices from the Preset drive to the User drive.

In this case, any keyboard part (RIGHT 1–3) can be selected.

Repeat step #3 as often as necessary until all your favorite voices
are contained in this display.

Also try copying preset voice(s) to the external device in the same way as explained
here.

Press the [COPY]
LCD button (lower
[3] button).

Press the [OK]
LCD button (lower
[7] button).

The Voice located in the PRESET
drive is copied to the USER drive.

Select the folder created in step #2.

Press the
[TAB] button.

Select the voice(s) to be copied.

Summary of Contents for 2

















































































































































































































































Search results

Summary of Contents for 2

Reviews:

Related manuals for 2

Brands by name

Popular brands

Yamaha 2, Owner'S Manual

Search results

Summary of Contents for 2

Reviews:

Related manuals for 2

Brands by name

Popular brands