Xinje DS5K Series, User Manual

Page: 94 / 194

User-defined output 2:
Note: please refer to chapter 5-12-3 for hysteresis loop.
Optional trigger conditions:
Condition no. Meaning Unit
0 - -
203
Current command
Rated current %
205
Current feedback
Rated current %
301
Speed command
rpm
302
Speed feedback
rpm
308 Speed deviation rpm
4402
Position command
1 command
4404
Position feedback
1 command
1406 Position deviation 1 command
502 Bus voltage V
503 Drive internal temperature
℃
506 Average output power W
508 Average thermal power W
P5-14
The trigger condition of user-defined output 2
Default
trigger
condition
Trigger
condition
setting
Unit Suitable mode Change Effective
0
See below
table:
optional trigger
condition
Related to
trigger
condition All the modes Anytime At once
P5-15
The comparison value for the trigger condition of user-defined output 2
Unit
Default setting Range Suitable mode Change Effective
Related to
trigger
condition
0 -9999~9999 All the modes Anytime At once
P5-16
When P5-14≥P5-15 or P5-14<P5-15, SOx output
Setting
value
Function
Default
setting Suitable
mode
Change Effective
0 P5-14≥P5-15, SOx output
0
All the
modes
Anytime At once
1 P5-14
＜
P5-15, SOx output
2
P5-14 absolute value
≥P5-15, SOx output
3
P5-14 absolute value
＜
P5-15, SOx output
P5-17
User-defined output 2 hysteresis loop
Unit
Default setting Range Suitable mode Change Effective
Related to
trigger
condition
0
-32768~
32767
All the modes Anytime At once
P5-53
Output terminal setting of user-defined output 2
Signal name
Default setting Meaning Change
User-defined
output 2
n.0000
Default
setting is not
distribute to
the
output
terminal
Range 0000-0014, distribute to the
output terminal through P5-53