Xinje DS5F Series, User Manual

Page: 105 / 210

103
5.7.5.7 User-defined output signal
User can define 2 outputs. The defined method is SOx output when A>B or A<B. A is 9 activating
conditions; B is user-defined comparison value.
User-defined output 1:
P5-10
The trigger condition of user-defined output 1
Default
trigger
condition
Trigger condition
setting Unit Suitable mode Change effective
0
See below table:
optional trigger
condition
Related to
trigger
condition
All the modes Anytime At once
P5-11
The comparison value for the trigger condition of user-defined output 1
Unit
Default
setting
Range Suitable mode Change Effective
Related to trigger
condition
0
-32768~
32767
All the modes Anytime At once
P5-12
When P5-10≥P5-11 or P5-10<P5-11, SOx output
Setting
value
Function
Default
value Suitable
mode
Change Effective
0
P5-10≥P5-11, SOx output
0
All the
modes
Anytime At once
1 P5-10
＜
P5-11, SOx output
2
P5-10 absolute value ≥P5-11, SOx
output
3
P5-10 absolute value ≤P5-11, SOx
output
P5-13
User-defined output 1 hysteresis loop
Unit
Default
setting
Range Suitable mode Change Effective
Related to trigger
condition
0 0~65535 All the modes Anytime At once
P5-52
Output terminal setting of user-defined output 1
Signal name
Default
setting Meaning Change
User-defined output
1
n.0000
Default
setting is
not
distribut
e to the
output
terminal Range 0000-0018, distribute to the output
terminal through P5-52.
Encoder Z phase signal
P5-48=n.0011
SO1 output
P5-48=n.0001
SO1 output
2ms