ADSL2+ Tester 6 Working with TestManagerPro
72-0046-03A 67
•
Switch off the instrument.
•
Connect RS232 communication cable between the integrated RS232 port with the
serial port of your PC.
•
Switch on the instrument and set RS232
“
Port State
”
as
“
ON
”
.
•
Click
“
Select
”
icon in the short-cut bar or in the
“
Manipulation
”
menu to choose the
type of instrument which you are working with.
•
Click
“
Connect
”
icon in the short-cut bar or in the
“
System
”
menu to make the
connection with the instrument.
•
After connecting successfully, user can do the operations as below.
ü
Upload the stored results:
Click
“
Upload
”
icon in the short-cut bar or in the
“
Manipulation
”
menu to upload
the stored results from the instrument.
ü
View the uploaded results:
Click
“
View
”
icon in the short-cut bar or in the
“
Manipulation
”
menu to check the
detailed information of every uploaded results in the software. If there has a
graph result, user can also view the histogram analysis of the error and alarm
events. In addition, user can delete and print any result.
ü
Clean up all uploaded results in software:
Click
“
Clean Up the Records
”
the
“
System
”
menu to delete all the uploaded
results of one instrument in the list.
ü
Upgrade the embedded software:
Click
“
Upgrade embedded software
”
the
“
System
”
menu to update the
embedded software of the selected instrument.
First step:
Click
“
Read
”
button to read out the type and software version of the
selected instrument.
Second step:
Click
“
Load File
”
button to load the target hex file into the
program.
Third step:
Click
“
Next
”
button to enter into the upgrading window and then click
“
Upgrade
”
button to start upgrading.
Fourth step:
The program will automatically complete the upgrading process.
After being upgraded, the instrument will reset itself.
Fifth step:
Switch off the instrument and uninstall the RS232 communication
cable. Close
“
TestManagerPro
”
program.
