ADSL2+ Tester 4 Navigating the Displays
72-0046-03A 32
Caution:
It is very important to be aware of the upper network protocol stack used by
DSLAM. Only the right configurations of the protocol and other relative
parameters can guarantee the successful login onto Internet.
The authentication of this tester has been setted to "AUTO", which can find
the authentication of DSLAM and match it automatically, including PAP, CHAP,
MSCHAP. Users do not need to set it before testing.
As the different protocol is selected, the corresponding settings will be
displayed in Page 1 and Page 2 of
“
WAN PING
”
settings menu. The detailed
description will be shown below.
Item
Option
Description
PPPoE
PPP over Ethernet
PPPoA
PPP over ATM
BRIDGE
RFC-1483 Bridge (Ethernet over ATM)
MER
IP over Ethernet over ATM (MAC Encapsulated
Routing)
Protocol
IPoA
IP over ATM
Table 7: Protocol configuration descriptions
a.
PPPoE
(Point-to-Point Protocol over Ethernet) settings menu
•
Protocol Overview
PPP over Ethernet (PPPoE) provides the ability to connect a network of hosts over a
simple bridging access device to a remote Access Concentrator. With this model, each
host utilizes its own PPP stack and the user is presented with a familiar user interface.
Access control, billing and type of service can be done on a per-user, rather than a
per-site, basis.
The base protocol is defined in RFC 2516.
•
Page 1 of the
“
PING WAN
”
setting menu (PPPoE)
In Page 1, set
“
Protocol
”
as
PPPoE
, as shown in Fig 10. And press
“
Cursor
Moveable Right and Down
”
key to move the cursor to the positions of
“
DST
”
and
“
Authentication
”
. And then you can use
“
F1
”
,
“
F2
”
,
“
F3
”
and
“
F4
”
softkeys to select
parameters.
All the setting parameters of
“
DST
”
are shown in Table 6.
All the setting parameters of
“
Authentication
”
are shown in Table 8.
