ADSL2+ Tester 4 Navigating the Displays
72-0046-03A 34
Caution:
Please contact your local ISP or IT for the correct VPI, VCI, Username and
password. Only all these parameters in correct can guarantee the good
connection with Internet.
When viewing or inputting the username and password, you may press
“
F3
”
or
“
F4
”
key to reveal the remainder characters.
Item
Description
Option
VPI
Virtual Path Identifier, the field in the ATM
cell header that identifies to which VP
(Virtual Path) the cell belongs.
0
~
255
VCI
Virtual Channel Identifier, the identifier in
the ATM cell header that identifies to
which virtual channel the cell belongs.
0
~
65535
Username
Username, the most length of username
is 43 bytes.
EDIT
RECENT
Password
Password, the most length of password is
43 bytes.
EDIT
RECENT
Writing Config
Confirm to write configuration.
YES
Table 9:
“
VPI
”
,
“
VCI
”
,
“
Username
”
,
“
Password
”
and
“
Writing Config
”
If the configuration is written into the tester successfully, the tester will start
to connect with DSLAM. Otherwise,
“
Write fail
”
will be displayed in the
information line on LCD.
b.
PPPoA (Point to Point Protocol over ATM) settings menu
•
Protocol Overview
PPP over ATM AAL5 (PPPoA) describes the use of ATM Adaptation Layer 5 (AAL5) for
framing PPP encapsulated packets.
The base protocol is defined in RFC 2364.
•
“
PING WAN
”
settings Menu (PPPoA)
Refer to
“
WAN PING
”
settings menu (PPPoE).
c.
BRIDGE settings menu
