Xiaguang XP XG2045, Manual

Page: 27 / 71

ADSL2+ Tester 4 Navigating the Displays
72-0046-03A 27
Fig 4: “ Settings ” menu
4.2.1 “ Line Parameter ” settings menu
Press “ F1 ” in Fig 4 to select “ Line Parameter ” settings menu. In page 1, press “ Cursor
Moveable Right and Down ” key to move the cursor to the position of “ Standard ” . And
then you can use “ F1 ” , “ F2 ” , “ F3 ” and “ F4 ” to choose the parameters, See Fig 5.
a. Page 1 of “ Line Parameter ” settings menu
In “ Line Parameter ” test mode, only the ADSL line standard should be set. And all the
configuration parameters of “ Standard ” are shown in Table 4.
Item Option Organization Description
AUTO —— Auto detect and set the standard
ADSL2+ ITU ITU-T G.992.5 Recommendation
ADSL2 ITU ITU-T G.992.3 Recommendation
ANSI T1.413 ANSI ANSI T1.413 Issue 2
G.DMT ITU ITU-T G.992.1 Recommendation
G.LITE ITU ITU-T G.992.2 Recommendation
Standard
RE-ADSL ITU Reach Extended ADSL (Annex L)
Table 4: “ Standard ” configuration descriptions
b. Page 2 of “ Line Parameter ” settings menu
Press “ PgDn ” key to go to Page 2, as shown in Fig 6. In Page 2, press “ Cursor
Moveable Right and Down ” key to move the cursor to the positions of “ Down Data
Rate ” , “ Down SNR Margin ” , “ Down Capacity ” . And then you can use “ F1 ” , “ F2 ” , “ F3 ”
and “ F4 ” to choose the parameters.
S ett ings P:1/2 10:30:00
F unct ion [ LINE PARAM ETER ]
Li ne St andar d [ AUTO]
LINE
PARAM
LINE
B ERT
> >
PING
i
Connect ing ……