Xiaguang XP XG2045, Manual, Page: 46 / 71

ADSL2+ Tester 4 Navigating the Displays
72-0046-03A 46
4.3.3 “ PING ” results menu
After “ LAN PING ” settings, connect the tester to the LAN, “ LAN LINK/ACTIVE ” LED is lit.
Or, after “ WAN PING ” settings, connect the tester to the ADSL line, “ WAN LINK ” LED is
lit. Press “ Start/Stop ” key and “ Start/Stop ” LED is lit green steady, then press “ Result ”
ke to switch to “ Results ” menu of “ PING ” .
Press “ F1 ” , “ F2 ” , “ F3 ” and “ F4 ” to select the result information, as shown in Fig 23.
Fig 23: “ PING ” results menu
Results menu of “ PING ” include “ Real-time Analysis ” and “ Statistic Analysis ” . And
“ Real-time Analysis ” descriptions are shown in Table 17.
Result
Analysis
Connected Status
Disconnected
Status
Display
Real-time
Analysis
For example:
Reply from 220.181.28.42
Bytes=56 times=58.0ms TTL=51
Request timed out Real-time
Table 17: “ Real-time Analysis ” description
“ Statistic Analysis ” descriptions are shown in Table 18.
Result Analysis Connected Status Disconnected Status
SENT
Count Count
RECEIVED
Count None
LOST
Count of lost messages Count
LOST RATIO
Ratio of lost messages Count
Table 18: “ Statistic Analysis ” decription
4.3.4 “ TRACE ” results menu
After completing “ TRACE ” settings, press “ Start/Stop ” key to start the test. And press
Result s 00D00H05M03S
[ R-TIM E ANALYSIS ]
Reply fr om 220.181.28.42
Byt es=56 t imes=58.0ms TT L=51
Reply fr om 220.181.28.42
Byt es=56 t imes=58.0ms TT L=51
R-TIME
ANALYS
STAT.
ANALYS
i
R u n n i n g . P l e a s e v i e w r e s u l t s