Xerox WORKCENTRE 7120, User Manual

Page: 54 / 234

Printing
WorkCentre 7120 Multifunction Printer
User Guide 54
The following custom paper sizes are also supported: X width between 182 and 432 mm (7.2 x 17 in.),
and Y length between 140 and 297 mm (5.5 x 11.6 in.). Custom paper sizes can be specified in
1-mm increments.
Tray 1, Tray 2, Tray 3, and Tray 4 accept paper weights from 60 g/m² to 256 g/m².
To load paper in Tray 1, Tray 2, Tray 3, or Tray 4:
1.
Pull the paper tray out toward you.
WARNING:
Do not open all trays at once. The printer could topple forward, possibly
causing injury.
2. Before loading paper into the paper trays, fan the edges to separate any sheets of paper that are
stuck together. This reduces the possibility of paper jams.
3. If required, move the paper tray guides further out to load the new paper. To adjust the side and
front guides, pinch the guide lever on each guide and slide the guides to their new position. To
secure the guides in position, release the levers.
wc7120-021
wc7120-031
wc7120-027