Xerox WORKCENTRE 7120, User Manual

Page: 115 / 234

Copying
WorkCentre 7120 Multifunction Printer
User Guide
115
4. For each additional segment you wish to copy, repeat Step 3.
5. When all segments have been scanned, in the Copy screen, touch Last Original .
The entire copy job prints.
Note: Because all the segments print as one job, you can select options such as covers or booklet
creation that will apply to the entire job.
To select Build Job options:
1.
Touch
Copy
on the touch screen, then touch the
Job Assembly
tab.
2. Touch
Build Job
, then touch
On
.
3. Select from:
a.
Copy Output
: touch
Paper Supply
,
Stapling
,
Collation
and
Output/Offset
options, then
touch Save .
b. Booklet Creation : see Creating Booklets on page 102. Select the desired settings, then
touch
Save
.
c.
Covers
: see Including Covers on page 109. Select the desired settings, then touch
Save
.
d.
Annotations
: see Adding Annotations on page 111. Select the desired settings, then
touch Save .
e. Segment Separators : to insert separator pages between segments, touch Segment
Separators, then choose from the following:
•
No Separators
: separators are not inserted. Touch
Save
.
•
Blank Separators
: blank separators are inserted. To specify the quantity of separators,
touch the plus or minus ( + / – ) buttons, then touch Save .
• 1-Sided Separators Side 1 Only : the first page of the loaded documents is copied on the
front side of a separator. Touch
Save
.
•
1-Sided Separators Side 2 Only
: the first page of the loaded documents is copied on the
back side of a separator. Touch Save .
• 2-Sided Separators : the first two pages of the loaded documents are copied onto each
side of a separator. Touch
Save
.
f.
Watermarks
: See Adding Watermarks on page 112. Select settings, then touch
Save
.
4. Touch
Save
.