Xerox WORKCENTRE 7120, User Manual

Page: 45 / 234

Installation and Setup
WorkCentre 7120 Multifunction Printer
User Guide
45
To connect by specifying the printer’s IP address:
1. Open System Preferences from the Applications folder.
2. Open Print & Fax , then click the Printing tab.
3. Click the plus button under the list of detected printers.
4. Click IP Printer in the Printer Browser window.
5. Click IPP , Line Printer Daemon – LPD , or HP Jet Direct – Socket .
6. Type the printer’s IP address in the Address field.
7. Type a name for the printer.
8. Type a location for the printer.
9. Click Xerox in the Print Using drop-down list.
10. Click the printer model, then click Add .
Adding the Printer for OS X Version 10.5
1. Open the Applications folder, then double-click System Preferences .
2. Click Print & Fax .
3. Click the plus button under the list of installed printers.
4. Type the IP address or host name of the printer.
5. Type a Queue name for the printer, or leave it blank to use the default queue.
6. Click the printer, then click Add .
Note: If the printer was not detected by the network, check to make sure that the printer is on, and
the Ethernet cable is connected properly.
If you want to connect by specifying the printer’s IP address:
1. From the
Applications
folder on the dock, click the
System Preferences
icon.
2. Click
Print & Fax
.
3. Click the plus button under the list of installed printers.
4. Click
IP Printer
.
5. Click
IPP
,
Line Printer Daemon – LPD
, or
HP Jet Direct – Socket
.
6. Type the printer’s IP address in the
Address
field.
7. Type a name for the printer.
8. Type a location for the printer.
9. Click the desired driver in the
Print Using
drop-down list.
10. Click the printer model, then click
Add
.