Xerox WorkCentre 3315DN User Manual Download Page 202

Page: 202 / 262

Troubleshooting

Xerox WorkCentre 3315DN/3325DN/3325DNI
User Guide

202

Retry Redial?

The machine is
waiting for a specified

time interval to redial
a previously busy
station.

• You can press

immediately redial, or

Stop

cancel the redial operation.

Self Diagnostics...
Please wait

The engine in your printer is
checking some problems detected.

• Please wait a few minutes.

Send Error

There is a problem in DNS

There is a problem in DNS.

• Configure the DNS setting.

Send Error

There is a problem in POP3

There is a problem in POP3.

• Configure the POP3 setting.

Send Error
There is a problem in SMTP

There is a problem in SMTP.

• Change to the available server.

Send Error
There is a problem in SMTP
authentication

There is a problem in SMTP
authentication.

• Configure the authentication

setting.

Send Error

There is a problem on the NIC
Card

There is a problem on the network
interface card.

• Turn the power switch off and

on. If the problem persists, call
for service.

Toner is empty
Toner is empty. Replace with new
one

The print cartridge has reached
the end of its lifespan. The printer
stops printing.

• Replace the print cartridge.

(See

Replacing the Print

Cartridge

on page 183.)

Toner is Low
Toner is Low.
Order new one

Only a small amount of toner is
left in the print cartridge. The print
cartridge will need to be replaced
soon.

• Prepare a new cartridge for

replacement. You may
temporarily increase the
printing quality by
redistributing the toner. (See

Redistributing Toner

page 189.)

Toner Not Compatible
Print cartridge is not compatible.

Check guide

The print cartridge you have
installed is not for your machine.

• Install a new print cartridge

designed for your machine.

Toner Not Installed
Print cartridge is not Installed.

Install it

The print cartridge is not installed.

• Install the print cartridge.

Too many Faxes
Too may faxes are received.

Print or remove job.

There are too many received faxes
in the memory.

• Print or remove received fax.

Message

Meaning

Suggested Solutions

Summary of Contents for WorkCentre 3315DN







































































































































































































































































Search results

Summary of Contents for WorkCentre 3315DN

Reviews:

Related manuals for WorkCentre 3315DN

Brands by name

Popular brands

Xerox WorkCentre 3315DN, User Manual

Search results

Summary of Contents for WorkCentre 3315DN

Reviews:

Related manuals for WorkCentre 3315DN

Brands by name

Popular brands