Xerox WorkCentre 3315DN User Manual Download Page 167

Page: 167 / 262

Fax Setup

Xerox WorkCentre 3315DN/3325DN/3325DNI

User Guide

167

Press the up/down arrows to highlight the option required and press

Press the up/down arrows to highlight the setting required or enter the correct information using
the keypad.

Press

to save the selection.

Continue customizing the

Sending

options as required, then press

Stop

to return to

Ready

mode.

Receiving

Press

Machine Status

on the

control panel

Press the up/down arrows to highlight

Fax Setup

and press

If necessary, enter the

Administrator’s Password

using the keypad. Refer to

Accessing the Setup

Options

on page 154 for instructions.

Press the up/down arrows to highlight

Receiving

and press

The following

Receiving

options and settings are available:

Note:

indicates the factory default setting.

Image TCR

Enables or disables the printing of a transmission
report with a reduced image of the first page of the fax
that was sent.

•

Off

Dial Mode

Sets the dialling mode to either tone or pulse.

Note:

May not be available in some regions.

•

Tone

•

Pulse

Toll Save

Sends faxes at a preset toll-saving time to save on call
costs.

•

Off

•

Option

Description

Settings

Receive Mode

You can select the default fax
receiving mode.

•

Fax

•

Tel

•

Ans

•

Fax

•

DRPD

Ring to Answer

You can specify the number of
times the machine rings before
answering an incoming call.

•

1 - 7 Times
1

Stamp RCV Name

This option allows the machine
to automatically print the page
number, and the date and time
of reception at the bottom of
each page of a received fax.

•

Off

Option

Description

Settings

Summary of Contents for WorkCentre 3315DN







































































































































































































































































Search results

Summary of Contents for WorkCentre 3315DN

Reviews:

Related manuals for WorkCentre 3315DN

Brands by name

Popular brands

Xerox WorkCentre 3315DN, User Manual

Search results

Summary of Contents for WorkCentre 3315DN

Reviews:

Related manuals for WorkCentre 3315DN

Brands by name

Popular brands