Xerox Wide Format 6622 User Manual Download

Page: 175 / 212

2. Open the Toner Cartridge Latch and rotate the Toner Cartridge 180 degrees in an

upward direction until the notch near the Toner Supply Hole on the cartridge is visible.

3. Pull down on the left end of the Toner Cartridge Latch and remove the cartridge by

grasping the left end.

4. Shake the new cartridge several times in order to prepare the contents for use and

remove the foam band from the cartridge.

NOTE

Do not apply pressure to the center of the cartridge. Pressure may cause the
toner to spill from the ends of the cartridge.

8-3

Xerox

Wide Format 6622 Solution

™

User Guide

Maintenance

Summary of Contents for Wide Format 6622





















































































































































































































Search results

Summary of Contents for Wide Format 6622

Reviews:

Related manuals for Wide Format 6622

Brands by name

Popular brands

Xerox Wide Format 6622, User Manual

Search results

Summary of Contents for Wide Format 6622

Reviews:

Related manuals for Wide Format 6622

Brands by name

Popular brands